Transmission lines tower are either monopolar or bipolar systems. With bipolar systems, a conductor arrangement with one conductor on each side of the tower is used. On some schemes, the ground conductor is used as electrode line or ground return. In this case, it had to be installed with insulators equipped with surge arrestors on the pylons in order to prevent electrochemical corrosion of the pylons. For single-pole Suntech transmission with ground return, towers with only one conductor can be used. In many cases, however, the towers are designed for later conversion to a two-pole system. In these cases, often conductors on both sides of the tower are installed for mechanical reasons.
Contact Person: Mr. Peter
Tel: 86-13958364836
Dia 660mm Conductor Stringing Blocks , Stringing Equipment For Overhead Power Lines
MC Nylon Cable Pulley Sheaves For Transmission Stringing Pulley Block
Factory Price MC Nylon Conductor Cable Stringing Pulley Block With Hook
High Wind Tolerance Lattice Q355 Q255 Angle Steel Tower
132kv Transmission Line Galvanized Steel Lattice Tower
Polygonal Conical 10kv To 750kv Transmission Line Angle Tower
89kN 33kV Max High Voltage Line Post Insulators
Anti Fouling 240kN Toughened Glass Electrical Insulators
70KN 33KV High Voltage Disc Type Porcelain Suspension Insulator
69KV 10KN Erode Proof High Voltage Polymer Line Post Insulators